Feature
This gauge is easy to put and measure the temperature and pressure of fluid for building air-conditioning.
■ We don't have to put a pressure gauge and thermometer separately. This gauge perform double service.
■ This gauge can reduce the putting part from 2 to 1.
■ By putting the special well （inner pipe/with valve system）, it is possible to put and pull without running out the fluid.
Spec
| Size |
φ100 |
| Type |
Angle type（T）
Straight type（S） |
| Connection |
R1/2 |
| Temperature range |
0～50℃
0～100℃ |
| Pressure range |
0～0.6MPa
0～1MPa
0～1.6MPa |
| Sensor |
Out dia.
15×60mm or 100mm |
| Sensor material |
C3604 |
Note
※ There is a valve system within the special well, When this gauge is put to the well, the inner pipe in the well is pushed and it nakes open the valve of the bottom of well and leads to measuring part the fluid. The inner pipe shuts the return valve and doesn`t allow the fluid to out when this gauge is put out because the edge is pused by the spring.
|
Type T
|
Type S
|
Type R
|
Specialty well
|
|
